01The challenge
The Part 1 inspection uncovered deteriorated brakes and poor wiring connections on this returning customer's trailer. The bearings and races were still in great shape, so the repair focused on four new brake assemblies, sealed connections, fresh bearing grease and new rear seals.
02The repair
- Installed all four new complete electric brake assemblies and connected the brake wires with sealed connectors.
- Cleaned the brake drums and repacked the existing bearings.
- Installed the inner bearings and new rear grease seals, then refitted the brake drums.
- Installed the outer bearings, washers, locking tabs and spindle nuts.
- Seated the bearings by tightening the spindle nuts to 50 ft-lb while rotating each hub, then backed the nuts off and made the final finger-tight adjustment.
- Adjusted the brakes and installed the dust caps and wheels.
- Torqued the lug nuts to complete the job.
03The result
The brake replacement and bearing service are complete. New brakes, sealed wiring connections, clean drums, freshly packed bearings and new seals—another happy customer!